Tools Used By The New Jersey Electricians

Nowadays, the profession of New Jersey electricians encompasses a series of tasks that involve a certain complexity. No building is conceived in which there is no electrical installation. The electrician is a professional whose presence is very necessary for the development of the construction of the building. It is the one that installs the work connection, essential to make possible the existence of the electrical energy necessary so that there is lighting in the pit and so that the machinery with which one works. The New Jersey electricians are a professional whose presence is very necessary for the development of the construction of a building.

In addition to being present in many of the phases of the work, the electrician has to plan and perform the electrical installation of the building that will make possible its habitability. On the other hand, offers its technical assistance to other facilities such as air conditioning, ACS (Sanitary Hot Water), fire, security, public address, etc. And finally, and outside the context of the work, an electrician must have sufficient knowledge to carry out the maintenance of installations already made. Most of the tools used by the New Jersey electricians are the usual ones in the toolbox. However, it will also need more specific ones that must, above all, guarantee their safety.

It is worth repeating it: never forget that electricity involves certain dangers. Therefore, the first step to avoid accidents is to equip with approved tools. This means, fundamentally, that they must be covered with the appropriate insulating material. These are special plastics that, in addition to being insulated from tension, are waterproof and repel water, moisture or possible body sweat.

Few, but adequate

As in any other job, without good means, it is difficult to achieve satisfactory results. The basic equipment for electricity tasks is made up of a few elements.

In addition, as is the case with screwdrivers, many of them are usually present in all houses. Since you must buy few tools, it is recommended to invest in those that offer maximum security and guarantee. The objective: to avoid unnecessary risks.

Voltage testers

Of all the necessary tools in electricity, perhaps the most specific is the different voltage testers or testers.  There are three types: The simplest of all is the check screwdriver or phase tester, whose function is to show if a conductor (cable) or a contact (for example, a plug) is or is not under tension. Its use is a first measured security.

The bipolar testers have two points joined by a cable and, in addition to checking the existence of voltage, it also serves to measure it (if it is 220 V or 380 V ) and to check if the neutral conductor and the ground connection are connected. Finally, there are the current pass testers that, in addition to fulfilling all the functions of the two previous types, are also used to locate the conductors.

With the purchase of current passage or with the pole search you can measure the voltage, the current intensity and the resistance or continuity of the circuit. This tool is easy to use and very useful for the New Jersey electricians when identifying if it has power for a security issue.